Skip to main
HIRSCHSOL

 
Facebook Instagram Linkedin X YouTube

wh_tajima

TMEZ-KC Series

TMEZ400pt-1

TMEZ Series

The industry’s first technology “i-TM” (automatic upper thread tension adjustment) is now available on the multi-head cylinder-type machine that can be applied to ready-made products.

TMEZDOWNLOAD BROCHURE

 

 

With a diverse line of robust multi head embroidery machine options, Tajima has a machine to solve every problem big or small.

Get a Quote

 ※DCP stands for Digitally Controlled Presser foot.

The DCP can be adjusted randomly according to the material thickness on the operation panel. It simplifies the mechanical process and saves time

 
 
 
 ※Direct Command Switches
Various operation switches and multi-color LEDs are located on each tension base. Since all of the main functions of the operation panel can be
manipulated in front of each head, the efficiency of operators will improve. Commonly used functions may be assigned to the custom switches.

 

 

Reinforcement of the cap frame support structure has contributed to the stabilization of the embroidery finish,

and dramatically increases the maximum rotation speed up to 1,000 rpm.

 
 
 
 

Reinforced tubular frame arm
The newly-designed arms have been made 3 times more rigid than the conventional type, easing the support of heavy items like jackets.

Reinforced upper thread lock
The upper thread lock has been reinforced so it can hold the thread on suspended heads more firmly to avoid thread cast-off and to reduce the occurrence of stitching errors at the start of embroidery.

 

12.1 touch panel-1

12.1-inch TFT touch panel
The large monitor allows for easier operation of the panel.

New auto thread trimming device
The picker has been eliminated for easier under thread exchange.The whole trimming mechanism has also been redesigned for stable trimming under various conditions.

 

Head interval refers to the space from one head to the next.  Standard machines refer to machines with 360mm (14") head intervals. Stretch machines have a 500mm (19.6") head interval.  A larger interval makes it easier for larger, bulky products to fit comfortably between heads and a larger x-axis embroidery field.

Standard vs Stretch

 

Tajima TMAR2 1506HEAD 360

360 MM Head Interval

The standard 360 MM head interval machines are ideal for producing a standard mix of products that are not limited to caps, shirts, sweatshirts, jacket backs, and infinitely more.

Standard vs Stretch

 

TMAR4H-5001

500 MM Head Interval

The 500mm head interval provides more space between heads which makes it easier to accommodate larger, bulky products such as sweatshirts, jackets, blankets, etc..  This setup is ideal for customers who do a larger percentage of these types of items and can accommodate the larger machine size.

 

 

 
 
Model Needles Multicolor
head		 Head interval Embroidery space（D×W）mm
K1502C 15 2 500 450×500
K1504C 15 4 360 450×360
K1504C 15 4 500 450×500
K1506C 15 6 360 450×360
K1506C 15 6 500 450×500
K1508C 15 8 360 450×360
K1508C 15 8 500 450×500
 
 
 

 

 

 

 

 

 

 

Safety Beam Sensor

 

 

A beam surrounds the work area while machine is in motion. If the plane is broken the machine will immediately stop.

 

 

 

 

 

 

 

Thread Locking System

 

 

The thread locking system secures the thread after a trim to prevent the thread pulling out during start.

 

 

 

 

 

 

 

 

LED Needle Base Light

 

 

LED needle base light illuminates the needle area and enables the operator a better view of the item being embroidered.

 

 

 

 

 

 

 

 

Trimmed Needle Plate

 

 

A shorter needle plate offers an increased embroidery area on many items such as small sleeves or caps.

 

 

 

 

 

 

 

Slim Cylinder

 

 

The slim cylinder makes it possible to embroider on smaller objects such as socks, gloves, and pockets.

 

 

 

 

 

 

Versatile Cap Driver

 

 

The new cap driver incorporates a lower shaft and a third locking pin to stabilize the cap while running to enhance quality, and run at higher speeds.

 

 

 

 

 

 

 

Steep Head Tilt

 

 

The steeper head angles the bill of any cap and allows for placement closer to the brim increasing the embroidery area.

 

 

 

 

 

 

 

Thread Break Detection

 

 

A sensor monitors the thread movement while stitching.  If the tension on the upper or lower thread is broken the machine stops stitching relaying an error on the controller.

standard Tajima Hoops

 

IS A

TMEZ-KC

Right for you?

Enter your info below and a Hirsch sales representative will contact you about adding a Tajima multi-head machine to your business.
tajima brother dtg TAJIMA_SOFTWARE SEIT coloreellogo2021white Adelco fixed height tajima Dekken TAJIMA_SOFTWARE brother dtg Brown-wht stahls coloreellogo2021white
Hirsch offers only the best for your business  | View  products